Manuals / Brands / Computer Equipment / All in One Printer / HP / Computer Equipment / All in One Printer

HP C8100 NOTE:, Setup, NOTE:, Manual, Network, CAUTION:, Automatic, •IP Address, •Subnet Mask, setup Network, •Default Gateway, Change IP settings

1 43

Download 43 pages, 5.66 Mb

Chapter 2

Change IP settings

The default setting for the IP settings is Automatic, which sets the IP settings automatically. However, if you are an advanced user, you might want to manually change the IP address, subnet mask, or the default gateway. To see the IP address and subnet mask of the HP All-in-One, print a network configuration page from the HP All-in-One.

NOTE: When manually entering an IP setting, you must already be connected to an active network, otherwise the setting will not stay when you exit from the menu.

CAUTION: Be careful when manually assigning an IP address. If you enter an invalid IP address during the installation, your network components will not be able to connect with the HP All-in-One.

1.Touch Setup on the display.

2.Touch Network.

NOTE: If the menu option you want is not visible on the screen, touch or

to scroll through all the menu options.

3.Touch Advanced Setup.4.Touch IP Settings.

5.Touch Manual.

6.Touch one of the following IP settings.

•IP Address•Subnet Mask•Default Gateway

The visual keyboard appears on the display.

7.Use the visual keyboard to enter your IP settings.

setup Network

18 Network setup

Contents

Page Page Contents 1 HP All-in-Oneoverview The HP All-in-Oneat a glance Control panel features Find more information Use the Roxio Creator Basic Software 2 Network setup Wired network setup What you need for a wired network Connect the HP All-in-Oneto the network Integrated wireless WLAN 802.11 network setup What you need for an integrated wireless WLAN 802.11 network Connect to an integrated wireless WLAN 802.11 network To connect the HP All-in-Onewith the Wireless Setup Wizard Setup Network 4.Touch Wireless Setup Wizard This runs the Wireless Setup Wizard Wireless ad hoc network setup What you need for an ad hoc network Create a network profile for a Windows XP computer Create a network profile for other operating systems Connect to a wireless ad hoc network Install the software for a network connection Connect to additional computers on a network Change the HP All-in-Onefrom a USB connection to a network connection Manage your network settings Change basic network settings from the control panel Change advanced network settings from the control panel settings Change IP settings Automatic 3.Touch Advanced Setup 4.Touch IP Settings Manual 3 Use the HP All-in-Onefeatures Load originals and load paper Load originals Load full-sizepaper Page Load 10 x 15 cm (4 x 6 inch) photo paper Avoid paper jams View, select, and print photos Preserve your photos on CD/DVD and label the disc Scan an image Scan an original to a computer Scan an original to a memory card or storage device Make a copy Check the estimated ink levels Replace the ink cartridges Page Page 4 Troubleshooting and support Uninstall and reinstall the software Hardware setup troubleshooting Solution and Troubleshooting support Contact HP Network troubleshooting To check your LAN card (Windows 2000 and XP) My Computer System Properties Hardware 3.Click Device Manager To make sure your network connection is active Wireless setup troubleshooting During wireless network setup you do not see the SSID (network name) displayed Broadcast SSID Weak signal Cannot connect to network during setup Clear paper jams To clear a paper jam from the rear door To clear a paper jam from the top door Information on ink cartridges and the print head Support process 5 Technical information System requirements Product specifications Energy Star® notice Ink cartridge yield Regulatory notices Warranty