5 Technical information

information Technical

The technical specifications and international regulatory information for the HP All-in-One are provided in this section.

System requirements

Software system requirements are located in the Readme file.

Product specifications

For product specifications, go to the HP Web site at www.hp.com/support.

Paper specifications

•Main input tray capacity: Plain paper sheets: Up to 100 (20 lb./75 gsm. paper)

•Output tray capacity: Plain paper sheets: Up to 50 (20 lb./75 gsm. paper)

•Photo tray capacity: Photo paper sheets: Up to 20

NOTE: For a complete list of supported media sizes, see the printer software.

Physical specifications

•Height: 21.6 cm (8.5 inches)

•Width: 44.8 cm (17.6 inches)

•Depth: 38.8 cm (15.3 inches)

•Weight: 11.3 kg (25 pounds)

Power specifications

•Power consumption: 25 watts maximum (average printing)

•Input voltage: AC 100 to 240 V ~ 600 mA 50–60 Hz

•Output voltage: DC 32 V===375 mA, 16 V===500 mA

NOTE: Use only with the power adapter supplied by HP.

Environmental specifications

•Recommended operating temperature range: 15º to 32º C (59º to 90º F)

•Allowable operating temperature range: 5º to 40º C (41º to 104º F)

•Humidity: 20% to 80% RH non-condensing

•Non-operating (Storage) temperature range: –20º to 60º C (–4º to 140º F)

•In the presence of high electromagnetic fields, it is possible the output from the HP All-in-One may be slightly distorted

•HP recommends using a USB cable less than or equal to 3 m (10 feet) in length to minimize injected noise due to potential high electromagnetic fields

Energy Star® notice

This product is designed to reduce power consumption and save natural resources without compromising product performance. It has been designed to reduce total energy consumption both during operation and when the device is not active. This product qualifies for ENERGY STAR® which is a voluntary program established to encourage the development of energy-efficient office products.

38 Technical information