Connect the HP All-in-One to the network

To connect the HP All-in-One to the network, use the Ethernet port on the back of the device.

To connect the HP All-in-One to the network

1.Remove the yellow plug from the back of the HP All-in-One.

2.Connect the Ethernet cable to the Ethernet port on the back of the HP All-in-One.

3.Connect the other end of the Ethernet cable to an available port on your Ethernet router, switch, or wireless router.

Network setup

4.Once you have connected the HP All-in-One to the network, install the software as described in “Install the software for a network connection” on page 14.

Integrated wireless WLAN 802.11 network setup

For optimal performance and security in your wireless network, HP recommends you use a wireless router or access point (802.11) to connect the HP All-in-One and the other network elements. When network elements are connected through a wireless router or access point, this is called an infrastructure network.

Integrated wireless WLAN 802.11 network setup

7