CheXpress® CX30 User’s Manual_Rev 020309

Bottom View of the CheXpress® CX30

Fig. 2

Power Connector

 

USB Port

Cable Channels

CheXpress® CX30 Installation

Un-Boxing the CheXpress® CX30

Step 1: Lay the box on it’s side and slide out the packaing and scanner. Lift off the top plastic insert (USB cable is inside), then lift the scanner from the bottom insert.

Fig. 3

USB Cable (Inside / on top of plastic insert)

Power Supply

Scanner wrapped

 

 

 

Inkjet Cartridge

in plastic bag

 

 

 

 

 

 

 

 

WARNING: Before powering on the scanner, you will want to install the USB driver. See ‘Installing the Driver Files’ section on page 8 for instructions.

Setting Up The Scanner

1.Install USB driver onto operating PC before connecting device (see section on Installing USB Driver)

2.Place the unit on a flat surface near the PC and away from direct light.

6