Top cover

Description

Spare part number

 

 

In black (for HP and CPQ)

607766-001

 

 

Before removing the top cover, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4.Remove the battery (see Battery on page 38).

5.Remove the service cover (see Service cover on page 40).

6.Remove the keyboard (see Keyboard on page 54).

Remove the top cover.

1.Turn the computer upside down, with the front toward you.

2.Remove the six Phillips PM2.0×6.0 screws (1) and the Phillips PM2.5×4.0 screw (2) that secure the top cover to the base enclosure.

3.Turn the computer right-side up, with the front toward you.

4.Open the computer as far as it will open.

5.Disconnect the speaker cable (1) from the system board.

Component replacement procedures 57