5.Disconnect the WLAN module antenna cables from the WLAN module (see WLAN module on page 42).
6.Remove the following components:
●Hard drive (see Hard drive on page 46)
●Keyboard (see Keyboard on page 51)
●Top cover (see Top cover on page 54)
●Speakers (see Speakers on page 61)
●USB board (see USB board on page 63)
●Power connector cable (see Power connector cable on page 64)
Remove the display assembly:
1.Disconnect the display panel cable (1) from the system board.
2.Release the wireless antenna cables from the clips (2) built into the base enclosure.
CAUTION: Support the display assembly when removing the following screws. Failure to support the display assembly can result in damage to the display assembly and other computer components.
3.Remove the four Phillips PM2.5×6.0 screws (3) that secure the display assembly to the computer.
4.Remove the display assembly (4).
Component replacement procedures | 67 |