●Display assembly (see Display assembly on page 66)

●System board (see System board on page 73)

●Fan/heat sink assembly (see Fan/heat sink assembly on page 80) Remove the processor:

1.Use a flat-bladed screw driver to turn the processor locking screw one-half turn counterclockwise (1), until you hear a click.

2.Lift the processor (2) straight up, and then remove it.

NOTE: The gold triangle (3) on the processor must be aligned with the triangle icon (4) embossed on the processor socket when you install the processor.

Reverse this procedure to install the processor.

Component replacement procedures

87