Computer Setup

Computer Setup Utilities (F10)

Use Computer Setup to do the following:

Change factory default settings.

Set the system date and time.

Set, view, change, or verify the system configuration, including settings for processor, graphics, memory, audio, storage, communications, and input devices.

Modify the boot order of bootable devices such as hard drives, diskette drives, CD-ROM drives, DVD-ROM drives, or LS-120 drives.

Configure the boot priority of IDE and SCSI hard drives controllers.

Configure Quiet Drive options (for drives that support this feature).

Enable Quick Boot, which is faster than Full Boot but does not run all of the diagnostic tests run during a Full Boot. You can set your system to:

always Quick Boot (default);

periodically Full Boot (from every 1 to 30 days); or

always Full Boot.

Enable or disable Network Server Mode, which allows the computer to boot the operating system when the power-on password is enabled, with or without a keyboard or mouse attached. When attached to the system, the keyboard and mouse remain locked until the power-on password is entered.

Computer Setup Guide

1