Table 5 Computer Setup—Power (continued)

● USB Wake on Device Insertion (some models)—Allows system to wake from Standby on USB device insertion.

● Unique Sleep Blink Rates—This feature is designed to give the user a visual indication of the sleep state the system is in. Each sleep state has a unique blink pattern:

● S0 = Solid green LED.

● S3 = 3 blinks at 1Hz (50% duty cycle) followed by a pause of 2 seconds (green LED), i.e., repeated cycles of 3 blinks and a pause.

 

 

 

 

● S4 = 4 blinks at 1Hz (50% duty cycle) followed by a pause of 2 seconds (green LED), i.e.,

 

 

 

 

 

repeated cycles of 4 blinks and a pause.

 

 

 

 

● S5 = LED is off.

 

 

 

 

If this feature is disabled, S4 and S5 both have the LED off. S1 (no longer supported) and S3

 

 

 

 

use 1 blink per second.

 

 

 

 

 

 

 

Hardware Power

SATA power management enables or disables SATA bus and/or device power management.

Management

 

 

 

 

 

 

 

 

 

 

 

 

 

Thermal

● Fan idle mode—This bar graph controls the minimum permitted fan speed.

 

 

 

 

 

 

 

 

 

 

 

 

NOTE: This setting only changes the minimum fan speed. The fans are still automatically

 

 

 

 

 

 

 

 

 

controlled.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Computer Setup—Advanced

NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration.

Table 6 Computer Setup—Advanced (for advanced users)

Option

Heading

 

 

Power-On Options

Allows you to set:

 

● POST mode (QuickBoot, FullBoot, or FullBoot every 1–30 days).

 

● POST messages (enable/disable).

 

● F9 prompt (enable/disable or hidden/displayed). Enabling this feature will display the text F9 =

 

Boot Menu during POST. Disabling this feature prevents the text from being displayed.

 

However, pressing F9 will still access the Shortcut Boot [Order] Menu screen. See

 

Storage > Boot Order for more information.

 

● F10 prompt (enable/disable or hidden/displayed). Enabling this feature will display the text

 

F10 = Setup during POST. Disabling this feature prevents the text from being displayed.

 

However, pressing F10 will still access the Setup screen.

 

● F11 prompt (hidden/displayed). Setting this feature to displayed will display the text

 

F11 = Recovery during POST. Hiding this feature prevents the text from being displayed.

 

However, pressing F11 will still attempt to boot to the HP Backup and Recovery partition.

 

See Factory Recovery Boot Support for more information.

 

● F12 prompt (enable/disable or hidden/displayed). Enabling this feature will display the text

 

F12 = Network during POST. Disabling this feature prevents the text from being displayed.

 

However, pressing F12 will still force the system to attempt booting from the network.

 

● Factory Recovery Boot Support (enable/disable). Enabling this feature will cause an additional

 

prompt, F11 = Recovery, to be displayed during POST on systems with HP Backup and

 

 

10 Computer Setup (F10) Utility

ENWW