Table A-1Numeric Codes and Text Messages (continued)

Control panel message

Description

Recommended action

 

 

 

 

1151-Serial Port A Address Conflict Detected

Both external and internal serial ports are

1.

Remove any serial port expansion

 

assigned to COM1.

 

cards.

 

 

2.

Clear CMOS. (See Appendix B,

 

 

 

Password Security and Resetting

 

 

 

CMOS on page 59.)

 

 

3.

Reconfigure card resources and/or run

 

 

 

Computer Setup or Windows utilities.

 

 

 

 

1152-Serial Port B Address Conflict Detected

Both external and internal serial ports are

1.

Remove any serial port expansion

 

assigned to COM2.

 

cards.

 

 

2.

Clear CMOS. (See Appendix B,

 

 

 

Password Security and Resetting

 

 

 

CMOS on page 59.)

 

 

3.

Reconfigure card resources and/or run

 

 

 

Computer Setup or Windows utilities.

 

 

 

 

1155-Serial Port Address Conflict Detected

Both external and internal serial ports are

1.

Remove any serial port expansion

 

assigned to same IRQ.

 

cards.

 

 

2.

Clear CMOS. (See Appendix B,

 

 

 

Password Security and Resetting

 

 

 

CMOS on page 59.)

 

 

3.

Reconfigure card resources and/or run

 

 

 

Computer Setup or Windows utilities.

 

 

 

1201-System Audio Address Conflict

Device IRQ address conflicts with another

Enter Computer Setup and reset the IRQ in

Detected

device.

Advanced > Onboard Devices.

 

 

 

1202-MIDI Port Address Conflict Detected

Device IRQ address conflicts with another

Enter Computer Setup and reset the IRQ in

 

device.

Advanced > Onboard Devices.

 

 

 

1203-Game Port Address Conflict Detected

Device IRQ address conflicts with another

Enter Computer Setup and reset the IRQ in

 

device.

Advanced > Onboard Devices.

 

 

 

 

1720-SMART Hard Drive Detects Imminent

Hard drive is about to fail. (Some hard drives

1.

Determine if hard drive is giving correct

Failure

have a hard drive firmware patch that will fix

 

error message. Enter Computer Setup

 

an erroneous error message.)

 

and run the Drive Protection System test

 

 

 

under Storage > DPS Self-test.

 

 

2.

Apply hard drive firmware patch

 

 

 

if applicable. (Available at

 

 

 

http://www.hp.com/support.)

 

 

3.

Back up contents and replace hard

 

 

 

drive.

 

 

 

1796-SATA Cabling Error

One or more SATA devices are improperly

For one device, use SATA 0. For two devices,

 

attached. For optimal performance, the SATA

use SATA 0 and SATA 1. For three devices,

 

0 and SATA 1 connectors must be used

use SATA 0, SATA 1, and SATA 5.

 

before SATA 4 and SATA 5.

 

 

1797-SATA Drivelock is not supported in RAID mode.

Drivelock is enabled on one or more SATA hard drives, and they cannot be accessed while the system is configured for RAID mode.

Either remove the Drivelocked SATA device or disable the Drivelock feature. To disable the Drivelock feature, enter Computer Setup, change Storage > Storage Options > SATA Emulation to IDE, and select File > Save Changes and Exit. Reenter Computer Setup and select Security > Drivelock. For each listed Drivelock-capable SATA device, ensure Drivelock is Disabled. Lastly,

54 Appendix A POST Error Messages

ENWW