8.Place the thermal sensor on top of the hard drive in a position that does not cover the label (1) and attach the thermal sensor to the top of the hard drive with the adhesive strip (2).

Figure 2-37Replacing the Thermal Sensor

9.Slide the cover on the carrier (1) and replace the screw on the rear of the carrier to secure the cover in place (2).

Figure 2-38Replacing the Carrier Cover

10.Slide the hard drive carrier into the enclosure on the computer and lock it with the key provided.

NOTE: The carrier must be locked for power to be supplied to the hard drive.

ENWW

Installing Additional Drives 39