Solving Hard Drive Problems
Table
Hard drive error occurs.
Cause | Solution |
|
|
Hard disk has bad sectors or has failed.
1.In Microsoft Windows XP,
In Microsoft Windows Vista,
2.Use a utility to locate and block usage of bad sectors. If necessary, reformat the hard disk.
Disk transaction problem.
Cause | Solution |
|
|
Either the directory structure is bad or there is a problem with a file.
In Microsoft Windows XP,
In Microsoft Windows Vista,
Drive not found (identified).
Cause | Solution |
|
|
Cable could be loose. | Check cable connections. |
|
|
The system may not have automatically recognized a newly | See reconfiguration directions in Solving Hardware Installation |
installed device. | Problems on page 32. If the system still does not recognize |
| the new device, check to see if the device is listed within |
| Computer Setup. If it is listed, the probable cause is a driver |
| problem. If it is not listed, the probable cause is a hardware |
| problem. |
| If this is a newly installed drive, run the Computer Setup utility |
| and try adding a POST delay under Advanced > |
| Options. |
|
|
The device is attached to a SATA port that has been disabled | Run the Computer Setup utility and ensure the device's SATA |
in Computer Setup. | port is enabled in Storage > Storage Options. |
|
|
Drive responds slowly immediately after | Run Computer Setup and increase the POST Delay in |
| Advanced > |
|
|
18 Chapter 2 Troubleshooting Without Diagnostics | ENWW |