Solving Memory Problems
If you encounter memory problems, some common causes and solutions are listed in the following table.
CAUTION: Power may still be supplied to the DIMMs when the computer is turned off. To avoid damage to the DIMMs or the system board, you must unplug the computer power cord before attempting to reseat, install, or remove a DIMM module.
For those systems that support ECC memory, HP does not support mixing ECC and
Table
System will not boot or does not function properly after installing additional memory modules.
Cause | Solution |
|
|
A memory module is not installed in the system board memory | The sockets must be populated with at least one memory |
socket. | module. Install memory modules in the following order: XMM4, |
| XMM3, XMM2, XMM1. |
|
|
Memory module is not the correct type or speed grade for the | Replace module with the correct |
system or the new memory module is not seated properly. | the computer. On some models, ECC and |
| modules cannot be mixed. |
|
|
Out of memory error. |
|
|
|
Cause | Solution |
|
|
Memory configuration may not be set up correctly. | Use the Device Manager to check memory configuration. |
|
|
You have run out of memory to run the application. | Check the application documentation to determine the memory |
| requirements. |
|
|
Memory count during POST is wrong. |
|
|
|
Cause | Solution |
|
|
The memory modules may not be installed correctly. | Check that the memory modules have been installed correctly |
| and that proper modules are used. |
|
|
Integrated graphics may use system memory. | No action required. |
|
|
Insufficient memory error during operation. |
|
|
|
Cause | Solution |
|
|
Too many Terminate and Stay Resident programs (TSRs) are | Delete any TSRs that you do not need. |
installed. |
|
|
|
You have run out of memory for the application. | Check the memory requirements for the application or add |
| more memory to the computer. |
|
|
ENWW | Solving Memory Problems 37 |