Use the arrow keys to select the appropriate heading, then press Enter. Use the arrow (up and down) keys to select the option you want, then press Enter. To return to the previous screen, press Esc.
CAUTION: Do NOT turn the computer power OFF while the ROM is saving the Computer Setup (F10) changes because the CMOS could become corrupted. It is safe to turn off the computer only after exiting the F10 Setup screen.
Computer Setup—Main
NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration.
Table 1 Computer
Option | Description | ||
|
| ||
System Time | Allows you to set system time. | ||
|
| ||
System Date | Allows you to set system date. | ||
|
| ||
Language | Allows you to select language. | ||
|
| ||
Floppy Diskette A: | Allows you to set drive A to: | ||
| ● | Disabled | |
| ● | 1.44 MB 3.5” | |
| ● | Not Installed | |
|
| ||
1st Drive | For each, allows you to: | ||
2nd Drive | ● | (view only) | |
3rd Drive (not used) |
| ◦ | Capacity (Size - HDD only) |
4th Drive (not used) |
| ◦ | Transfer Mode |
5th Drive | ● | Smart Support - run HDD | |
6th Drive |
| ◦ | SMART Status Check |
|
| ◦ | SMART Short |
|
| ◦ | SMART Extended |
|
| ||
System Information | (view only) | ||
| ● | Installed Memory | |
| ● | Memory Bank 1 | |
| ● | Memory Bank 2 | |
| ● | Memory Bank 3 | |
| ● | Memory Bank 4 | |
| ● | BIOS Revision | |
| ● | Core Version | |
| ● | Model Number | |
|
|
|
|
2 Computer Setup (F10) Utility | ENWW |