HP E217, E317 2.Install the Batteries

Lee_Jackie_QSG_e_ok.fm Page 4 Tuesday, March 29, 2005 1:22 PM

2.Install the Batteries

1.Open the Battery/Memory card door on the side of the camera by sliding the door toward the front of the camera.

2.Insert the batteries as indicated inside the door.

3.Close the Battery/Memory card door by pushing the door down and sliding the door toward the back of the camera until the door latches.

You can expect performance similar to the following from the different types of AA batteries that work in your camera:

Alkaline (Starter Batteries)	80 to 130 shots
Lithium	260 to 490 shots
NiMH (1800)	110 to 280 shots
If you use NiMH (rechargeable) batteries, be
sure that you fully charge them before using them
in the camera.

4 HP Photosmart E217/E317 Quick Start Guide