![](/images/backgrounds/290617/hp-compaq-deskpro-ep-sb-desktop-pc-5207-service-and-maintain-14288717x1.png)
Computer Setup Menu Continued |
| |
Heading | Option | Description |
Advanced* | Allows you to set POST mode (QuickBoot or FullBoot) and | |
|
| enables/disables POST messages. |
| Onboard Devices | Allows you to set resources for onboard system devices (serial |
|
| port, parallel port, etc.). |
| PCI Devices | Lists currently installed PCI devices and their IRQ settings. |
|
| Allows you to reconfigure IRQ settings for these devices or to |
|
| disable them entirely. |
| ISA PnP Devices | Lists current settings of Plug and Play (PnP) devices. |
|
| Enables or disables Plug and Play devices. |
|
| Note: Appears only when Plug and Play devices are currently |
|
| installed. |
| Bus Options | Enables/disables PCI bus mastering, PCI reset on warm boot, |
|
| and PCI VGA palette snooping. |
|
| Allows you to set ISA |
|
| bus priority (ISA/PCI). |
| Device Options | Allows you to set printer mode (flexible/standard), NumLock |
|
| state at |
| PCI VGA Configuration | Allows users to specify which VGA controller will be the “boot” |
|
| or primary VGA controller. |
Appears only if there are multiple PCI video adapters in the system.
*These options should be used by advanced users only.
Deskpro Service Reference Guide