Installing Windows NT Workstation 4.0 (CD Installation ONLY)

Customizing the Monitor Display

CAUTION: For hard drives larger than 6.4 GB, the Compaq Restore CD may be required if converting to NTFS. For network installation, refer to the Microsoft Windows NT installation manual or contact your authorized Compaq dealer, reseller, or service provider.

1.After completing Method 2, steps 1-5, exit FDISK, remove the diskette from the diskette drive, insert the Windows NT Workstation 4.0 installation CD into the CD-ROM drive, and restart the computer. The installation process begins automatically.

2.Let Windows NT create the primary partition using the maximum capacity of the hard drive.

3.When prompted, select NTFS to format the hard drive.

4.Read and follow all of the instructions on the screen to complete installation of Windows NT.

5.After installation is complete, install any additional drivers the system may require.

If you choose to customize your monitor display, you can manually select or change the monitor brand, model, refresh rates, color, resolution, and power management settings. Select the Display icon in the Control Panel to change display settings, or refer to the online documentation provided with the graphics controller utility.

Getting Started 1-5