HP Ethernet Network Interface Card hn230e manual Specifications, Operating Humidity

2The New Hardware Wizard cannot find the driver for the Ethernet card.

■You are probably on a window that reads: “Windows was unable to locate the software for this device….” Click Back as instructed. Be sure the CD-ROM is inserted in the CD-ROM drive of your computer and that the CD-ROM drive option checkbox is checked. Click Next. The wizard should locate and install the correct driver.

3The card and driver are installed, but I can’t connect to the network.

■Verify that your computer is properly configured to work with your network (see the documentation for your Gateway, router, switch, or hub).

specifications

Model Number:	hn230e
Standards:	IEEE 802.3 (10BaseT)
Connectors:	RJ-45 (10BaseT)
Ports:	10BaseT
Bus Characteristics:	32-bit; PCI Local Bus
	Specification 2x
RAM Buffer:	16 KB
Dimensions:	4.72” x 2.36”
Power:	430 mA at 5 v
Certifications:	FCC Part 15, Class B
Operating	0° C to 55° C
Temperature:	(32° F to 131° F)
Operating Humidity:	10% to 90%
	noncondensing

Ethernet network interface card 7

Filename: QS Ethernet NIC.doc		Title: HP-Print2k.dot
Template: QS Phoneline GW.dot		Author: Rob Heiret	Last Saved By: Elizabeth Stoneburg
Revision #: 65	Page: 7 of 12	Printed: 09/04/01 05:48 PM