2.2 Installing in Vehicles

2.2.1Mount to Windshield

1.Attach the device to the bracket base. Turn and tighten the car holder and the bracket base to make sure the device is securely locked in place.

2.With the suction-cup laying flat, position the suction-cup on the windshield.

3.Hold the base firmly on the windshield and press down the clamp to mount the car holder to the windshield. Make sure the base is securely locked in place.

2.2.2Adjust Device Position

Knob

Knob

Rotate the knob to swivel the device vertically.

Rotate the knob to swivel the device horizontally up to 360°.

8

Page 9
Image 9
HP f200 Car manual Installing in Vehicles, Mount to Windshield, Adjust Device Position