HP F300 manual Cleaning & Storing Your Ninja Professional Frying System, Cleaning Instructions

Cleaning & Storing Your Ninja®

Professional Frying System

CLEANING INSTRUCTIONS

1Make sure the deep fryer is turned off, unplugged and has cooled to room temperature.

2Remove the deep fryer lid. This may be washed in the dishwasher. Remove the fryer basket and the fryer basket lid and hand wash in hot, soapy water and wipe dry thoroughly.

3Clean the control panel with a damp cloth ONLY.

4Empty the oil from the reservoir. Wash the oil reservoir in hot, soapy water. The oil reservoir may be washed in the top rack of the dishwasher.

5Dry the oil reservoir thoroughly.

WARNING: DO NOT immerse the control panel or break-away safety power cord in water. Do not put the control panel or break-away safety power cord in the dishwasher.

WARNING: DO NOT use any type of abrasive pad or steel wool to clean the power cord magnetic socket.

WARNING: DO NOT use alcohol or cleaning solutions to clean the deep fryer.

HOW TO STORE SAFELY

1Ensure that your deep fryer is turned off, unplugged, cooled and clean.

2Store the fryer basket with the removable fryer basket lid inside the deep fryer and replace the lid.

3Detach the break-away safety cord from the unit and store along with the deep fryer.

4Store your deep fryer on a flat surface in a cool dry area where it will be safe from being tipped over and won’t be damaged or be hazardous to anyone or anything.

Fig. 11

HOW TO RESET THE DEEP FRYER

Your deep fryer is equipped with a reset feature. If for some reason the deep fryer stops heating, the reason may be that the reset switch has tripped. To reset the deep fryer:

1Unplug the break-away safety power cord from the outlet and remove the magnetic plug from the deep fryer.

2Push the thermostat reset button located on the back of the control panel with a ball point pen or pencil. (Fig. 11)

3Attach the magnetic plug to the unit, then plug in the break-away safety power cord to the outlet. The appliance will beep and the LCD display will turn on.

4Reprogram the time and the temperature and resume cooking.

TROUBLESHOOTING

If your deep fryer fails to operate, follow these instructions:

1Make sure the plug is securely plugged into the electrical outlet.

2Check to see if the magnetic end of the break-away safety power cord is attached to the unit. If it is not, FIRST unplug the cord from the wall, then attach the magnetic end of the plug to the unit, and then plug back into the wall.

3Make sure the electrical outlet is working. Unplug the unit, check your fuse box or circuit breaker box and replace the fuse or reset the breaker as necessary, then plug the unit back in.

4If the problem persists, contact Customer Service at 1-877-646-5288, Monday to Friday between 8:30 A.M. - 5:00 P.M. Eastern Standard Time, or visit our website at: www.ninjafryingsystem.com.

www.ninjafryingsystem.com 12

F300_15_series_IB_ENG_121221_6.indd 12

12-12-21 2:11 PM