Prerequisites
Before installing the adapter, follow these steps:
Step | 1. | Verify compliance with supported configurations using the HP Fibre Channel Host Bus Adapter |
|
| Support Matrix at: |
|
| http://docs.hp.com/en/netcom.html#Fibre%20Channel |
Step | 2. | Determine if the adapter is a Customer Replaceable Unit (CRU) using the HP Fibre Channel Host |
|
| Bus Adapter Support Matrix. If the adapter is not a CRU, contact your HP representative for |
|
| installation assistance. |
|
| Field Replaceable Units (FRUs) must be installed or replaced by qualified |
|
| representatives only. CRUs can be installed or replaced by customers or qualified |
|
| service representatives. |
Step | 3. | Check the following conditions: |
•To verify that the /usr/bin, /usr/sbin, and /sbin directories are in the PATH, enter the following command:
echo $PATH
•Verify that you have the following items:
—Grounding wrist strap
—Fibre Channel driver software media (included with the OS or application CD)
—Fibre Channel host bus adapter with an optical port protector attached (not included with all adapters)
•Verify that you have the following cabling items:
—Fiber optic cable terminated with a duplex LC connector.
—Cable map (optional)
4
