HP File System Extender (FSE) manual Priority JobID Number, Decr Number

2.7 NAME 41

2.7 NAME

fsejob – Monitor execution of running FSE Jobs. Show status of running FSE Jobs.

2.7.1SYNOPSIS

fsejob {–l	– –list	} [–M – –migration ] [–R		– –recall ] [–A – –admin ] [–C
– –recovery	] [–T	– –maint] [PartitionName] [–D			– –detail ]
fsejob {–t	– –status		} JobID
fsejob {–a	– –abort		} JobID...
fsejob {–p	– –priority} JobID {Number			{–I	– –incr } Number {–D – –
decr} Number}
fsejob {–h	– –help		}
fsejob {–v	– –version }

2.7.2 DESCRIPTION

This FSE command monitors execution of FSE jobs. It is used to perform these FSE administrator’s tasks:

•list running FSE jobs in whole FSE system or on a particular FSE partition,

•show current status of an FSE job,

•abort execution of specified FSE jobs,

•change the priority of an FSE job.

Each FSE command communicates with the FSE system components through the Management Interface (fse–mif). To execute an FSE command, the Management Interface must be running. If the connection to the Management Interface fails, check its status by running the fse status command. In case the Management Interface is not running, start it with the fse start command. There should also be a Partition Manager process (fse–pm) running for FSE partition for which the

File System Extender 3.2 Command Line Reference