6.Insert a new memory module:

CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module.

a.Align the notched edge (1) of the memory module with the tab in the memory module slot.

b.With the memory module at a 45-degree angle from the surface of the memory module compartment, press the module (2) into the memory module slot until it is seated.

c.Gently press the memory module (3) down, applying pressure to both the left and right edges of the memory module, until the retention clips snap into place.

CAUTION: To prevent damage to the memory module, be sure that you do not bend the memory module.

7.To replace the memory module compartment door:

a.Turn the computer upside down on a flat surface, with the memory module compartment toward you.

b.Align the door tabs with the edge of the computer and slide the door toward the back of the computer at a slightly tilted angle (1).

28 Chapter 5 Maintenance