Speakers
Description | Spare part number |
|
|
Speakers | |
|
|
Before removing the speakers, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 40).
5. Remove the following components:
a. Hard drive (see Hard drive on page 41)
b. Optical drive (see Optical drive on page 48)
c. Keyboard (see Keyboard on page 50)
d. Switch cover (see Switch cover on page 53)
e. Display assembly (see Display assembly on page 55)
f. Top cover (see Top cover on page 62)
Remove the speakers:
1. Disconnect the speaker cable (1) from the system board.
2. Remove the speaker cables (2) from the clip in the system board and the clips built into the base enclosure.
3. Remove the two Phillips PM2.5×4.0 screws (3) that secure the speakers to the base enclosure.
70 Chapter 4 Removal and replacement procedures