Card reader board
Description | Spare part number |
|
|
Card reader board | |
|
|
Before removing the card reader board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 40).
5. Remove the following components:
a. Hard drive (see Hard drive on page 41)
b. Optical drive (see Optical drive on page 48)
c. Keyboard (see Keyboard on page 50)
d. Switch cover (see Switch cover on page 53)
e. Display assembly (see Display assembly on page 55)
f. Top cover (see Top cover on page 62)
g. System board (see System board on page 72)
Remove the card reader board:
1. Turn the system board upside down, with the audio connectors toward you.
2. Remove the three Phillips PM2.0×4.0 screws (1) that secure the card reader board to the system board.
Component replacement procedures 77