QuickSpecs
HP L1950 Flat Panel Monitor
Technical Specifications
Panel | Type | Active matrix, thin film transistor (TFT) |
| Viewable Image Area | 19 in (48.25 cm) |
| (diagonal) |
|
Video/Other Inputs
Screen Opening (WxH) | 14.9 x 11.9 in (37.8 x 30.3 cm) |
Viewing Angle (typical)* | Up to 160° horizontal/160° vertical (10:1 contrast ratio) |
Brightness (typical)* | 300 nits (cd/m2) |
Contrast Ratio (typical)* | 800:1 |
Response Time (typical)* | 5 ms (rise + fall) |
Pixel Pitch | 0.294 mm |
Backlight Lamp Life (to half | 40K hours |
brightness) |
|
*All performance specifications represent the typical specifications provided by HP's component manufacturers; actual performance may vary either higher or lower.
Plug and Play | Yes (supports VESA DDC2B and DDC/CI; PC2001 compliant) |
USB 2.0 Hub | |
Input Signal | Two connectors: one |
Input Impedance | 75 ohms ± 2% |
Sync Input | Separate sync (HSYNC/VSYNC) |
Video Cable | |
Video Cable Length | 70.9 in/1.8 m; detached |
Signal Interface/ Performance
Horizontal Frequency | 24 to 83 kHz |
Vertical Frequency | 50 to 77 Hz |
Native Resolution | 1280 x 1024 @ 60 Hz (analog) |
| 1280 x 1024 @ 60 Hz (digital) |
Max Resolution (Analog) | 1280 x 1024 @ 75 Hz |
Max Resolution (Digital) | 1280 x 1024 @ 75 Hz |
Preset VESA Modes (non- | 640 x 480 @ 60 Hz, 72 Hz, 75 Hz |
interlaced) | 720 x 400 @ 70 Hz |
| 800 x 600 @ 60 Hz, 72 Hz, 75 Hz |
| 1024 x 768 @ 60 Hz, 70 Hz, 75 Hz |
| 1280 x 1024 @ 60 Hz, 75 Hz |
Preset MAC Mode | 832 x 624 @ 75 Hz |
| 1152 x 870 @75 Hz |
Preset SUN Mode | 1152 x 900 @ 76 Hz |
Fail Safe Mode | Yes (limits out of range signal messages) |
Max Pixel Clock Speed | 140 MHz |
User Programmable Modes | Yes, 15 |
| Yes |
| Yes |
Worldwide — Version 1 — August 1, 2007 | Page 2 |
