GPRS/EDGE

GPRS/EDGE

GPRS/EDGE technology provides a connection to the Mobile Phone Network that can be used for Web browsing, Multimedia Messaging Service (MMS) messaging, or accessing your corporate network.

NOTE EDGE is an enhancement to GPRS technology and enables higher speed data connections than GPRS. This means faster phone multimedia capabilities such as sending and receiving SMS/MMS messages, and sharing video clips. Check with your service provider to see if they support EDGE technology. If your service provider does not support the EDGE network, the HP iPAQ defaults to GPRS.

Changing GPRS Network Settings

The first time you use your SIM Card, the GSM/GPRS Manager automatically detects the phone network and operator and sets up the GPRS connection information for you. You can change these settings to your own preference or create your own network settings.

1.Tap Start > Settings > Connections tab > Phone Data Manager.

2.If your operator name appears in the drop-down list, it is recommended that you use that connection and, if needed, edit the default settings.

Editing Network Parameters

CAUTION Editing Network Parameters is not recommended unless you are being assisted by your mobile phone service provider.

▲Tap Start > Settings > Connections tab > Phone Data Manager > Edit network parameters.

Tapping Edit network parameters gives you access to the following areas:

●Internet Connection Information—Walks you through the different settings for General Packet Radio Service (GPRS) and Circuit Switched Data (CSD) connections.

●MMS Multimedia Messages—Allows you to modify the Multimedia Message Service (MMS) address.

●WAP Information—Allows you to modify the IP Address and Port for the Wireless Access Point (WAP) Gateway.

Editing an Internet Connection

1.Tap Internet Connection Information.

2.Tap the connection to edit, and then tap OK.

3.Enter a name for the connection such as the carrier name, and then tap Next.

ENWW

GPRS/EDGE 53