Removal and Replacement Procedures
✎Before disconnecting the antenna cables, make note of which cable is attached to which antenna clip on the Mini PCI communications card.
3.Disconnect the auxiliary and main 1 antenna cables from the Mini PCI communications module.
4.Spread the two retaining tabs 2 on each side of the Mini PCI socket to release the Mini PCI communications module. (The edge of the module opposite the socket rises away from the computer.)
5.Remove the Mini PCI communications module by pulling the module away from the socket at an angle 3.
✎Mini PCI communications modules are designed with notches 4 to prevent incorrect installation into the Mini PCI module socket.
Removing a Mini PCI Communications Module
Reverse the above procedure to install a Mini PCI communications module.
Maintenance and Service Guide |