Hewlett-Packard Company

3404 East Harmony Road

Fort Collins, Colorado 80528

Read Before Installing

A785xA CD-RW Drive in B-, C- and J-Class HP-UX Workstations

For a tutorial on creating CD-RW masters on HP-UX systems, refer to the /opt/OpenSource/cdrtools-1.10/USER_GUIDE.pdffile on the CD-RW software media.

Supported Features. This product (and associated software) is intended to be used primarily as a data storage and exchange device. Hewlett-Packard does not support the creation or duplication of audio CDs using this product and software. It is also recommended that you DO NOT use this drive as a backup tool.

Feature

HP Support

 

 

 

 

Audio CD duplication

No (both GUI and command line)

 

 

Create bootable HP-UX CD

GUI=No, Command line=Yes

 

 

Duplicate bootable CD

Yes (GUI and command line) if CD is valid

 

 

Multi-Session recording

No (both GUI and command line)

 

 

Copying HP-UX install CD

For more information go to USER_GUIDE.pdf on

 

the CD

 

 

Copy CD-to-CD

No (both GUI and command line)

 

 

Disk-at-once recording

No (both GUI and command line)

 

 

Track-at-once recording

Yes (both GUI and command line)

 

 

Data recording (any file type)

Yes (both GUI and command line)

 

 

Hardware Installation

The A785xA CD-RW drive you have purchased may be installed in any one of several models of HP- UX Workstations - b1000, b2000, b2600, c3000, c3600, c3650, c3700, j5600, j6000 or j6700. For complete instructions on how to install the drive on your system, please refer to the appropriate Owners Guide, Parts Replacement Guide or Technical Reference for your system. These documents can be found at: http://www.hp.com/workstations/support/documentation/hpux_manuals.html

This CD-RW drive can either be installed to replace an existing CD-ROM drive or as a new drive where none existed before. It also may have been integrated into your computer at the HP factory. HP CD-RW drives were designed to operate in the horizontal position. Do not position your workstation so the CD-RW drive is in a vertical position.

If you are replacing an existing CD-ROM drive with the CD-RW Drive, you must load the

PHKL_24282 (for HP-UX 11.0) or PHKL_24283 (for HP-UX 11i) patches from the CD-RW software media. If you are installing a new drive where none existed before, you must load the patches from the http://us-support.external.hp.comweb site. Make sure these patches are installed on your system before attempting to install the hardware.

Pub. No. A7853-90010