
hp L1725 LCD Monitor Setting Up the Monitor
To connect the cables to the monitor:
1Make sure the computer is turned off.
2Plug the video cable into the correct video connector (VGA or
| VGA cable → | VGA connector |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
NOTE: All monitors are equipped with both a VGA and a
3Open the cable management door and secure the video cable in the cable clips provided, making sure that the cable length is sufficient for the mode in which you will use your monitor (landscape or portrait). Refer to “Setting up the Cable Management System” in the picture on the previous page.
NOTE: To change your monitor’s position or mode easily, make sure that the length of your video cable between points a and b is:
at least 480 mm in portrait mode
at least 440 mm in landscape mode.
4Route the video cable, using the cable management at the monitor’s base, and plug it into the corresponding video connector on the computer.
12 English