WHEN REPLACING EEPROM (MEMORY) IC

CONFIRMATION OF CHECK SUM, POWER ON TOTAL HOURS, MICON VERSION AND DIGITAL TV MICON FIRMWARE

Initial total of MEMORY IC, POWER ON total hours, MICON VERSION and Digital TV MICON Firmware can be checked on the screen. Total hours are displayed in 16 system of notation.

NOTE: If you set a factory initialization, the total hours is reset to "0".

Please refer to "CONFIRMATION OF INITIAL DATA" when SUM DATA is not corresponding.

1.Turn on the POWER, and set to the TV mode.

2.Set the VOLUME to minimum.

3.Press both VOL. DOWN button on the set and Channel button (8) on the remote control for more than 2 seconds.

4.After the confirmation of each check sum, POWER ON total hours, MICON VERSION and Digital TV MICON Firmware, turn off the power.

*1 DVP1 is different according to each set.

MICON Version

Digital TV MICON Firmware

INIT : C80F

ROM : 0000

ADC : 8F97

DVP1 : F8B4 *1

DVP2 : 32A1

LCD ON 0000 OEC7154A_036

DTV d-l62155

Initial setting data check sum.

Rom correction data check sum.

AD CONVERTER data check sum.

SCALER data check sum.

POWER ON total hours.

=(16 x 16 x 16 x thousands digit value) + (16 x 16 x hundreds digit value)

+ (16 x tens digit value) + (ones digit value)

FIG. 1

CONFIRMATION OF INITIAL DATA

If a service repair is undertaken where it has been required to change the MEMORY IC, the following steps should be taken to ensure correct data settings while making reference to INITIAL SETTING TABLE (Attached "INITIAL DATA").

1.Turn on the POWER, and set to the TV mode.

2.Set the VOLUME to minimum.

3.Press both VOL. DOWN button on the set and Channel button ADDRESS and DATA should appear as FIG 2.

(6)on the remote control for more than 2 seconds.

ADDRESS DATA

INIT 0000 B4

LCD ON 0000

OEC7154A_036

DTV d-l62155

FIG. 2

4.ADDRESS is now selected and should "blink". Using the UP/DOWN buton on the remote, step through the ADDRESS until required ADDRESS to be changed is reached.

5.Press RIGHT/LEFT button to select DATA. When DATA is selected, it will "blink".

6.Again, step through the DATA using UP/DOWN button until required DATA value has been selected.

7.Pressing RIGHT/LEFT button will take you back to ADDRESS for further selection if necessary.

8.Repeat steps 4 to 6 until all data has been checked.

9.When satisfied correct DATA has been entered, turn POWER off (return to STANDBY MODE) to finish DATA input.

After the data input, set to the initializing of shipping.

10.Turn POWER on.

11.Press both VOL. DOWN button on the set and Channel button (1) on the remote control for more than 2 seconds.

12.After the finishing of the initializing of shipping, the unit will turn off automatically.

The unit will now have the correct DATA for the new MEMORY IC.

C-2

Page 12 Page 14
Page 13
Image 13
HP LC3260N manual When Replacing Eeprom Memory IC, Confirmation of Initial Data
Page 12 Page 14

LC3260N specifications

The HP LC3260N is a prominent model in the realm of wide format printers, specifically designed to cater to the needs of businesses and professionals requiring high-quality prints. At the forefront of its features is the capability to handle a variety of media sizes, making it suitable for diverse applications ranging from posters and banners to architectural plans and graphics.

One of the standout characteristics of the HP LC3260N is its print quality, which is achieved through its advanced thermal inkjet technology. This technology ensures sharp lines and vibrant colors, with a maximum resolution of up to 2400 dpi. The printer is equipped with a multi-color ink system, utilizing both dye-based and pigment inks. This combination allows users to produce vivid, long-lasting prints that can withstand various environmental conditions, making it ideal for indoor and outdoor use.

In terms of speed, the HP LC3260N doesn't disappoint. It offers rapid printing capabilities, significantly reducing wait times for large print jobs. This is particularly beneficial in busy office settings where efficiency is paramount. Furthermore, the printer is designed with user-friendliness in mind, featuring an intuitive interface that simplifies the printing process. Users can easily navigate through settings and choose options that best suit their printing needs.

Connectivity options also stand out with the HP LC3260N. It supports various connectivity methods, including USB and network interfaces, enabling seamless integration into existing workflows. This versatility allows multiple users to access the printer, fostering collaboration within teams.

The HP LC3260N is built with durability in mind, featuring a robust design that can endure the rigors of constant use. Its maintenance is relatively straightforward, with user-replaceable ink cartridges and easy access to internal components, ensuring minimal downtime.

In summary, the HP LC3260N wide format printer is a powerhouse for any business that demands high-quality, versatile, and efficient printing solutions. With its advanced technologies, user-friendly interface, and impressive print capabilities, it stands out as a reliable choice for various professional printing applications. Whether for graphic design, architecture, or marketing materials, the HP LC3260N meets and exceeds the expectations of users in a competitive market.
Top Page Image Contents