SERVICING NOTICES ON CHECKING

1.KEEP THE NOTICES

As for the places which need special attentions, they are indicated with the labels or seals on the cabinet, chassis and parts. Make sure to keep the indications and notices in the operation manual.

2.AVOID AN ELECTRIC SHOCK

There is a high voltage part inside. Avoid an electric shock while the electric current is flowing.

3.USE THE DESIGNATED PARTS

The parts in this equipment have the specific characters of incombustibility and withstand voltage for safety. Therefore, the part which is replaced should be used the part which has the same character.

Especially as to the important parts for safety

which is indicated in the circuit diagram or the

table of parts as a mark, the designated parts must be used.

4.BE CAREFUL WITH THE LCD PANEL

Avoid a shock to the panel while servicing. Take enough care to deal with it.

5.PUT PARTS AND WIRES IN THE ORIGINAL POSITION AFTER ASSEMBLING OR WIRING

There are parts which use the insulation material such as a tube or tape for safety, or which are assembled in the condition that these do not contact with the printed board. The inside wiring is designed not to get closer to the pyrogenic parts and high voltage parts. Therefore, put these parts in the original positions.

6.PERFORM A SAFETY CHECK AFTER SERVICING

Confirm that the screws, parts and wiring which were removed in order to service are put in the original positions, or whether there are the portions which are deteriorated around the serviced places serviced or not. Check the insulation between the antenna terminal or external metal and the AC cord plug blades. And be sure the safety of that.

(INSULATION CHECK PROCEDURE)

1.Unplug the plug from the AC outlet.

2.Remove the antenna terminal on TV and turn on the TV.

3.Insulation resistance between the cord plug terminals and the eternal exposure metal [Note 2] should be more than 1M ohm by using the 500V insulation resistance meter [Note 1].

4.If the insulation resistance is less than 1M ohm, the inspection repair should be required.

[Note 1]

If you have not the 500V insulation resistance meter, use a Tester.

[Note 2]

External exposure metal: Antenna terminal Earphone jack

HOW TO ORDER PARTS

Please include the following informations when you order parts. (Particularly the VERSION LETTER.)

1.MODEL NUMBER and VERSION LETTER

The MODEL NUMBER can be found on the back of each product and the VERSION LETTER can be found at the end of the SERIAL NUMBER.

2.PART NO. and DESCRIPTION

You can find it in your SERVICE MANUAL.

IMPORTANT

When you exchange IC and Transistor with a heat sink, apply silicon grease (YG6260M) on the contact section of the heat sink. Before applying new silicon grease, remove all the old silicon grease.

(Old grease may cause damage to the IC and Transistor).

A1-1

Page 2
Image 2
HP LC3260N manual Servicing Notices on Checking, HOW to Order Parts

LC3260N specifications

The HP LC3260N is a prominent model in the realm of wide format printers, specifically designed to cater to the needs of businesses and professionals requiring high-quality prints. At the forefront of its features is the capability to handle a variety of media sizes, making it suitable for diverse applications ranging from posters and banners to architectural plans and graphics.

One of the standout characteristics of the HP LC3260N is its print quality, which is achieved through its advanced thermal inkjet technology. This technology ensures sharp lines and vibrant colors, with a maximum resolution of up to 2400 dpi. The printer is equipped with a multi-color ink system, utilizing both dye-based and pigment inks. This combination allows users to produce vivid, long-lasting prints that can withstand various environmental conditions, making it ideal for indoor and outdoor use.

In terms of speed, the HP LC3260N doesn't disappoint. It offers rapid printing capabilities, significantly reducing wait times for large print jobs. This is particularly beneficial in busy office settings where efficiency is paramount. Furthermore, the printer is designed with user-friendliness in mind, featuring an intuitive interface that simplifies the printing process. Users can easily navigate through settings and choose options that best suit their printing needs.

Connectivity options also stand out with the HP LC3260N. It supports various connectivity methods, including USB and network interfaces, enabling seamless integration into existing workflows. This versatility allows multiple users to access the printer, fostering collaboration within teams.

The HP LC3260N is built with durability in mind, featuring a robust design that can endure the rigors of constant use. Its maintenance is relatively straightforward, with user-replaceable ink cartridges and easy access to internal components, ensuring minimal downtime.

In summary, the HP LC3260N wide format printer is a powerhouse for any business that demands high-quality, versatile, and efficient printing solutions. With its advanced technologies, user-friendly interface, and impressive print capabilities, it stands out as a reliable choice for various professional printing applications. Whether for graphic design, architecture, or marketing materials, the HP LC3260N meets and exceeds the expectations of users in a competitive market.