Using the auto-adjustment function (RGB INPUT source only)

You can optimize the screen performance by using the AUTO/SET button on the display (AUTO button on the remote control) and the Auto-adjustment Pattern Utility software on the CD provided.

NOTE: Do not use this procedure if the display is set to use a DisplayPort or HDMI/DVI input source.

If the display is using a PC analog signal input, this procedure can correct the following image quality conditions:

●Fuzzy or unclear focus

●Ghosting, streaking or shadowing effects

●Faint vertical bars

●Thin, horizontal scrolling lines

●An off-center picture

To use the auto-adjustment feature:

1.Allow the display to warm up for 20 minutes before adjusting.

2.Press the AUTO/SET button.

If the result is not satisfactory, continue with the procedure.

3.Insert the CD in the disc drive. The CD menu appears.

4.Select Open auto-adjustment software. The setup test pattern appears.

5.Press the AUTO/SET button to produce a stable, centered image.

6.Press the ESC key or any other key on the keyboard to exit the test pattern.

Using the On-Screen Display menu

The display settings can be adjusted from the On-Screen Display (OSD) menu.

 

Icon

Main menu

Function description

 

 

 

 

 

 

Picture

Set or change Video characteristics such as aspect ratio, brightness, contrast,

 

 

 

 

 

energy savings, picture mode, and screen options

 

 

 

 

 

 

 

 

 

Audio

Set or change the audio options

 

 

 

 

 

 

 

 

 

 

 

 

Time

Set or change the timer options

 

 

 

 

 

 

 

 

 

 

 

 

Option

Set or change display options such as OSD language, network setup, led lights

 

 

 

 

 

on/off, control button lock, power management, DDC-CI, and ISM Method

 

 

 

 

 

 

 

30 Chapter 4 Operating the display

ENWW