HP LD4210 42-inch 3 Setting up the display, Figure, Figure

3 Setting up the display

To set up the display, ensure that the power is turned off to the display, media player/computer system, and other attached devices, and then follow the instructions below.

Installing the stand (sold separately)

1.Take the parts for the stand out of the box.

●HP LD4201 and LD4210—Four screws M4 x 32 mm (1.26 in) and stand Figure 3-1HP LD4201 and LD4210—Stand accessory contents

●HP LD4710—Four screws M4 x 10 mm (0.39 in) and stand Figure 3-2HP LD4710—Stand accessory contents

6 Chapter 3 Setting up the display ENWW