●Connect an HDMI to DVI signal cable to the HDMI/DVI port on the display, and then to the DVI port on the media player/computer.

For AUDIO input from the media player/computer (this is only needed with DVI input signal connections), connect the RCA-PC audio cable (cable not included) to the display and to the Audio OUT ports on the media player/computer, then connect the display power cord.

NOTE: Use shielded signal interface cables (D-sub 15 pin cable, DVI cable) with ferrite cores to maintain standard compliance for this product.

Figure 3-30Connecting the HDMI to DVI signal cable

2.Select an input signal.

Press the INPUT button on the remote control, select the HDMI/DVI input signal, and then press the OK button to save.

Or, press the INPUT button on the back of the display, select the HDMI/DVI input signal, and then press the AUTO/SET button to save.

24 Chapter 3 Setting up the display

ENWW