HP LD4710 47-inch RGB, NOTE:, Figure, Figure, HDMI/DVI, Input List, Input List, Input List, Input List

5.Turn on power to the display by pressing the power button (1). Figure 3-24HP LD4201 and HP LD4210—Power button

1

Figure 3-25HP LD4710—Power button

1

6.Turn on the media player/computer.

7.Select an input signal:

Press the INPUT button on the remote control to open the Input List, select the appropriate input signal, and then press the OK button to save your change.

Or, press the INPUT button on the back of the display, select the appropriate input signal, and then press the AUTO/SET button to save your change.

●When connecting with a D-Sub (VGA) signal input cable, select RGB from the Input List.

●When connecting with an HDMI signal input cable or when connecting a DVI signal input cable with the HDMI to DVI cable, select HDMI/DVI from the Input List.

●When connecting with a DisplayPort signal input cable, select DP from the Input List.

NOTE: If connecting more than one input source, connect the signal cables [HDMI/DVI, RGB (VGA), and DisplayPort] to each media player/computer. Press the INPUT button on the remote control to select the input to view.

ENWW Connecting to external devices 21