Connecting RGB

1.For analog operation, connect the D-Sub signal cable to the RGB IN (1) connector on the rear of the display and the other end to the connector (2) on the media player/computer.

NOTE: If connecting to a Mac media player/computer, use the standard Mac adapter (3)–not included.

Figure 3-26Connecting the D-Sub signal cable

2

1

3

2.Connect the audio cable (sold separately) to the Audio (RGB/DVI) (1) connector on the rear of the display and the other end to the Line Out port (2) on the media player/computer if the video signal connection is from either a RGB (VGA) or DVI connector on the media player/computer.

Figure 3-27Connecting the audio cable

1

2

3.Select an input signal:

Press the INPUT button on the remote control, select the RGB input signal, and then press the OK button to save.

Or, press the INPUT button on the back of the display, select the RGB input signal, and then press the AUTO/SET button to save.

22 Chapter 3 Setting up the display

ENWW