CrystalView USB2

USB 2.0 and Video Extender

OVERVIEW

Extend video and USB 2.0 peripheral (including keyboard and mouse) up to 150 feet (50m) from the controlling computer

Supports USB 1.1 (low/ full speed) and USB 2.0 high speed devices at 480 Mbps

Advanced automatic video compensation and equalization with optional skew adjustments

Available in single, dual, or quad video models

Supports Video resolutions up to 1920 x 1200

Designed to support high powered USB devices

KVM

Features

Supports USB 1.1 (low and full speed) and USB 2.0 (high-speed)

Extend single, dual, or quad video and USB 2.0 peripherals up to 150 ft (50m) from a CPU using CATx cable (CAT5, 5e, 6, or 7)

Cable length compensation adjustments (Equalization and gain) are automatically performed

Video equalization and gain can be fine tuned with simple keyboard commands

Automatic video skew adjustments (optional)

Supports:

SVGA, VGA, XGA, RGB video modes Single or Dual head VGA video cards USB keyboards and mice

USB 2.0 high-speed peripherals

Video resolutions up to 1920 x 1200 @ 60Hz

Up to 500 ma of power is available at each USB port for powering high-power USB devices

Operating system independent

CrystalLink USB Fiber

OVERVIEW

Features

USB Fiber extender

Extend your USB peripherals up to 33,000' over singlemode fiber and 1,650' over multimode fiber

Designed to support high powered USB devices

Connect four USB devices to the receiver unit

Standard USB hubs can be used to increase the number of USB devices connected

Easy installation

Supports USB 2.0 (high-speed) & USB 1.1 (low/full speed)

Supports USB 2.0 (high-speed) and USB 1.1 (low/full speed)

Extend USB devices up to 33,000' (10km) over singlemode fiber, 1,650' (500m) over multimode fiber

4-USB ports on remote unit

Standard USB hubs can be used to increase the number of connected USB devices

Up to 500 ma of power is available at each USB port for powering high-power USB devices

Plug-and-Play installation, no configuration or setup needed. Installation consists of:

Connect transmitter to computer’s USB port

Connect receiver to a USB devices

Connect transmitter to the receiver with fiber cable

Apply power to both the transmitter and receiver and installation is complete

CrystalView Pro Fiber

Fiber KVM Extender

OVERVIEW

Extends keyboard, video, mouse, audio and serial up to 33,000 feet over fiber

Supports DVI and VGA video at resolutions up to 1600 x 1200 @ 60Hz (1920 x 1200 optional)

Supports PC or USB Single or Dual models

Easily adaptable to your system

Features

Supports:

DVI and VGA video modes

PS/2 and USB keyboards and mice

Full stereo audio (optional for speakers & mic) Serial (RS232 - optional)

Extend a KVM station from a CPU using fiber cable: (Multimode) 62.5-micron cable up to 650 feet

(Multimode) 50-micron cable up to 1,300 feet (Singlemode) 9-micron cable up to 33,000 feet

Video resolutions up to 1600 x 1200 @ 60Hz (1920 x 1200 optional)

Flexible modular architecture

Compatible with Rose Electronics KVM switches such as ServeView Pro, UltraView Pro, and UltraMatrix

09