Watching Two Pictures

SPress the green/PIP button on the remote control one or more times to cycle through these options:

• Overlapping pictures (PIP)

Side-by-side pictures (POP)

No second picture

When two pictures are shown, you can control their configuration. The “active picture” is the one with sound and that sometimes has a border.

To do this...

Press...

 

 

Find the active picture

or when no border is visible

 

 

Change the size of the active picture

or

 

 

Move the border to the other picture and play its sound

or

 

 

Swap picture positions

OK

 

 

Move an overlapping picture (PIP)

Settings, then go to Source > Dual picture > Layout

 

 

Show a different source

Source

 

 

Show only the active picture (end two pictures)

Green/PIP

 

 

NOTE: One of the pictures must be the antenna or cable source. However, you cannot view the antenna and cable sources at the same time.

Turning Off after a Delay

You can set the TV to play for up to two hours and then automatically turn off.

To set the sleep timer, press the blue/SLEEP button one or more times to select the delay, and then press OK.

To view the timer, press the blue/SLEEP button once.

Watching a Show 45