QuickSpecs

HP ProLiant ML115

Configuration Information-Factory Integrated Models

NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO product offerings and requirements.

NOTE: HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must start with a CTO Chassis.

NOTE: This product offering does not support HP Factory Express Server Configuration Level 1.

NOTE: FIO indicates that this option is a Factory Installable Option.

Step 1: Base Configuration

ModelsHP ProLiant ML115 NHP CTO Chassis (North America)439138-B21

Factory Integrated Models ship with:

Embedded NC320i PCI Express Gigabit Server Adapter

Keyboard and Mouse

370 Watts, PFC (Power Factor Correcting) Tower Form Factor (4U)

NOTE: HP SATA Drive Models are limited to <2TB support.

NOTE: On SATA models with embedded RAID, setup instructions are located in User Guide, CTO RAID is set-up not available. HP ProLiant 100 Series Server User Guide: http://h20000.www2.hp.com/bc/docs/support/SupportManual/ c00368941/c00368941.pdf?jumpid=reg_R1002_USEN

Step 2: Choose Required Options (only one of the following from each list unless otherwise noted)

Processors

AMD Athlon Processor Model 3500+ (2.2 GHz) Option Kit, FIO

440962-L21

 

AMD Opteron™ Processor Model 1220SE (2.8 GHz) Option Kit, FIO

437376-L21

 

AMD Opteron Processor Model 1216 (2.4 GHz) Option Kit, FIO

437375-L21

 

AMD Opteron Processor Model 1214 (2.2 GHz) Option Kit, FIO

437374-L21

 

AMD Opteron Processor Model 1210 (1.8 GHz) Option Kit, FIO

437373-L21

 

 

 

Memory

2 GB Unbuffered PC2-5300 ECC DIMM (1 x 2 GB)

432806-B21

 

1 GB Unbuffered PC2-5300 ECC DIMM (1 x 1 GB)

432804-B21

 

512 MB Unbuffered PC2-5300 ECC DIMM (1 x 512 MB)

432803-B21

 

 

 

DA - 12704 Worldwide — Version 16 — May 12, 2008

Page 9