HP ML310 Start-up Time typical, Stop Time, Laser Parameters, Operating Conditions, Dimensions

QuickSpecs

HP ProLiant ML310 Generation 3

Technical Specifications

Start-up Time (typical)	< 7seconds
Stop Time	< 4seconds
Laser Parameters	Type	Semiconductor Laser GaA1As
	Wave Length	780 ± 25 nm
Operating Conditions	Temperature	41° to 113° F (5° to 45° C)
	Humidity	10% to 80%
Dimensions	(HxWxD, maximum)	1.7 x 5.85 x 8.11 in (4.29 x 14.86 x 20.60 cm)
	Weight	2.09 lb (0.95 kg)
Embedded NC320i PCIeNetwork Interface	10Base-T/100Base-TX/1000Base-TX
Gigabit Server Adapter Compatibility	IEEE 802.3 10Base-T
	IEEE 802.3ab 1000Base-T
	IEEE 802.3u 100Base-TX
Data Transfer Method	Single lane (x1), 100MHz PCI Express Reference Clock
Network Transfer Rate	10Base-T (Half-Duplex)	10 Mb/s
	10Base-T (Full-Duplex)	20 Mb/s
	100Base-TX (Half-	100 Mb/s
	Duplex)
	100Base-TX (Full-	200 Mb/s
	Duplex)
	1000Base-TX (Half and	2000Mb/s
	Full-Duplex)
Connector	RJ-45
Cable Support	10Base-T	Categories 3, 4 or 5 UTP; up to 328 ft (100 m)
	10/100/1000Base-TX	Category 5 UTP; up to 328 ft (100 m)

Integrated 4 Channel SATA Controller (SATA Models only)

Drives Supported	Up to 4 SATA hard drives (1 drive/channel)
Channels	4
Storage Capacity	2 TB
Maximum SATA	150 MB/s per channel
Channel Transfer Rate
SATA Protocols	SATA-1a
Internal SATA	One 4-lane connector (all four channels)
Connectors

RAID levels supported RAID 0, RAID 1

DA - 12364 Worldwide QuickSpecs — Version 21 — 2-16-2007 Page 28