Removal and Replacement Procedures

5.18 Charger Board

Charger Board

Spare Part Number Information

Charger board

285525-001

The charger board shield is included in the Miscellaneous

Plastics/Hardware Kit, spare part number 285541-001.

1.Prepare the computer for disassembly (Section 5.3).

2.Remove the palm rest (Section 5.14).

3.Remove the three TM2.5 × 5.0 screws 1 that secure the charger board to the base enclosure (Figure 5-37).

4.Lift the front edge of the charger board shield 2 until it clears the base enclosure, then slide the shield forward to remove it.

5–46

Maintenance and Service Guide