HP NRM42 Problem, Problem, PVC connection, Corrective Action, Corrective Action, (“linesync”) failed, Initialization of the

Chapter 5

Troubleshooting

If the ADSL2+ Router is not functioning properly, you can refer first to this chapter for simple troubleshooting before contacting your service provider. This could save your time and effort but if the symptoms persist, then consult your service provider.

Problems starting up the router

Problem Corrective Action

None of the LEDs are on when you turn on the router.You have forgotten your router login and/or password.

Check the connection between the adapter a nd the router. If the error persists, you may have a hardware problem. In this case you should contact technical support.

Try the default login and password, please refers to Chapter

3.If this fails, you can restore your router to its factory settings by holding the Reset button on the back of your router for 6 seconds above.

Problems with the WAN Interface

Problem	Corrective Action
Initialization of the	Ensure that the telephone cable is connected properly from
PVC connection	the ADSL port to the wall jack. The ADSL LED on the front
(“linesync”) failed.	panel of the router should be on. Check that your VPI, VCI,
	encapsulation type and type of multiplexing settings are the
	same as those provided by your ISP. Reboot the router GE. If
	you still have problems, you may need to verify these settings
	with your ISP.

58