3.(Optional) Change the Rings to Answer setting to the lowest setting (two rings).
4.Run a fax test.
When the phone rings, the printer answers automatically after the number of rings you set in the Rings to Answer setting. The printer begins emitting fax reception tones to the sending fax machine and receives the fax.
Case B: Set up the printer with DSL
If you have a DSL service through your telephone company, and do not connect any equipment to the printer, use the instructions in this section to connect a DSL filter between the telephone wall jack and the printer. The DSL filter removes the digital signal that can interfere with the printer, so the printer can communicate correctly with the phone line. (DSL might be called ADSL in your country/ region.)
NOTE: If you have a DSL line and you do not connect the DSL filter, you cannot send and receive 
faxes with the printer.
Figure
1 | Telephone wall jack |
|
|
2 | DSL (or ADSL) filter and cord supplied by your DSL provider |
|
|
3 | Use the phone cord supplied in the box with the printer to connect to the |
| You might need to connect the supplied phone cord to the adapter provided for your country/ |
| region. |
|
|
138 Appendix B Additional fax setup | ENWW |