2

Setting up your

 

camera

Install the battery

1. Open the Battery/Memory card

door by sliding the door latch as indicated on the Battery/Memory card door. 2. Insert the battery in the larger slot, pushing the battery in until the

latch catches. 3. Close the Battery/Memory card

door.

Note Turn the camera off before

removing the battery. Fully charge the battery before using it the first time.

Charge the battery

You can charge the battery

in the camera, using the AC adapter.

Connect the AC power adapter to the camera,

then plug it into an electrical outlet.

The camera’s blinking Battery Charging light indicates that the battery is charging; the battery is fully charged when the light stays on solid (approximately 2–3 hours).

Turn on the camera

To turn on the camera, press the button.

English

Setting up your camera

9