HP R740 manual Setting up your camera, Charge the battery, Install the battery

English

2 Setting up your camera

Charge the battery

Before using the battery for the first time, fully charge it using the charger that came with your camera.

NOTE: Your camera uses a rechargeable

HP Photosmart LI40 battery (Q6277A). Do not charge any other battery in the charger.

1.Plug the charger into an electrical outlet, then insert the

battery into the charger as shown.

The charger’s Battery Charging light is orange while the battery is charging; the battery is fully charged when the light turns green (approximately 1.5 hours).

2. Remove the battery from the charger once it is fully charged.

Install the battery

1. Open the Battery/Memory Card door by sliding the door latch as indicated on the Battery/Memory Card door.

2. Insert the battery in the larger slot, pushing the battery in until the latch catches.

3. Close the Battery/Memory Card door.

8 HP Photosmart R740 series Digital Camera