Camera, Install the battery, Charge the battery

2	Setting up your
	camera

Install the battery

1. Open the Battery/Memory Card door by sliding the door latch as indicated on the Battery/Memory Card door.

2. Insert the battery in the larger slot, pushing the battery in until the latch catches.

3. Close the Battery/Memory Card door.

Note Fully charge the battery before using it the first time. Turn the camera off before removing the battery.

To remove the battery, press the battery latch as shown until the battery springs free.

You can charge the battery in the camera, using the USB cable and power adapter.

Note Your camera uses a rechargeable

HP Photosmart R07 Lithium Ion battery (L1812A/ L1812B). Do not charge any other battery in the camera, optional dock, or optional quick recharger.

Setting up your camera