Normal Focus (Default)—Use when taking pictures of subjects greater than 500 mm (20 in) away.

Macro—Use when taking close-up pictures of subjects between 100 mm and 1 m (4.7 to 39.4 in) away.

Auto Macro—Use when you are not sure if the subject is in the Macro or Normal focus range.

Infinity—Use when taking pictures of distant objects and landscapes.

Manual Focus—Allows you to step manually through the full focus range (see Using Manual Focus on page 15).

The focus range setting remains in effect until it is changed again, or you turn off the camera.

Using Manual Focus

You may want to use Manual Focus in low-light conditions or when you want to fine- tune focus of very close-up subjects.

1.When you select Manual Focus, a focus meter and a magnified view help you adjust focus.

2.With arrows surrounding the Manual Focus meter,

use to adjust the focus. If arrows do not

surround the Manual Focus meter, use until

they do, then use to adjust focus.

3.To change shooting modes while using Manual

Focus, use until arrows surround the shooting mode icon in the upper left corner, press , use to highlight a shooting mode, then press .

Using zoom

Your camera has both optical and digital zoom. Optical zoom physically extends the lens to make the subject of your picture appear closer. After you have extended the lens fully using optical zoom, the camera employs digital zoom. Digital zoom uses no moving lens parts.

Tip The more you zoom in on the subject of your picture, the more small movements of the camera are magnified (this is called camera shake). If

appears when you press the Shutter button halfway down, the picture may be blurry. Be sure to hold the camera still or add more light to the scene. Try holding the camera closer to your body or against a steady object, or set the camera on a tripod or stable surface.

Optical zoom

Optical zoom moves the lens between wide angle (1x) and telephoto (3x).

HP Photosmart R927 Digital Camera

15