6Connect the cables to the audio system.

7Connect the front, rear, side, and center speakers to the subwoofer. Refer to the speaker documentation.

8Turn on the PC.

NOTE: Always turn on the PC before you turn on the speaker system.

9Plug in the speaker system power.

10Turn on the speaker system.

11After the speakers are connected to the PC, configure the audio software for sound output for your PC model:

Type 6 connectors: See “Configuring audio output with Sound Effect Manager” on page 37.

Type 6 connectors, multistreaming: See “Configuring audio output with Realtek HD Sound Effect Manager” on page 39.

The following diagram shows a typical 7.1 audio installation:

28Getting Started Guide