Using the Memory Card Reader

1Insert the media into the card slot until it stops.

The activity light (A) on the memory card reader lights, and the PC automatically detects the media.

NOTE: Media must be inserted correctly. Note the direction of the notched corner on the media. See the “Media Insertion Guide” on page 51. CompactFlash and Microdrive are keyed and cannot be inserted incorrectly. Insert the receptacle edge (holes) of this media into the slot.

2The PC opens a window so you can use the media contents. You can copy files from or to the media.

3When you are finished, right-click the drive icon, select Eject, check that the activity light is on but not blinking, and then remove the media. A steady activity light indicates that the PC is not reading or writing the media.

WARNING: Do not try to remove media when the activity light is blinking; doing so may cause loss of data.

50Getting Started Guide